image 8
Rate this post

Drywall is used to cover the ceilings of a building. Different kinds are available. Some types are lighter than others. Lightweight drywall is easier to lift into place. However, it tends to bow more over time. It is therefore better to choose a thicker type of drywall in areas where the ceiling joist spacing is wide.

Lightweight drywall

If you’re considering putting lightweight drywall in your ceiling, consider using USG Lightweight Sheetrock. It’s a lightweight product that will save 20 to 30 percent in weight. You can also find it at other gypsum board manufacturers. You can find more information about this product at the following website.

What Drywall is Best For Ceilings?

The USG light wallboard is stronger than regular drywall and hangs well on ceilings that have 24-inch on-center joists. The lightweight drywall panels are easier to move around and are the same thickness as half-inch drywall panels. They’re also 13 pounds lighter than standard 1/2-inch drywall.

Lightweight drywall is also more user-friendly. Its core is normally made of chopped fiberglass, which makes it less prone to sagging between ceiling joists. Lightweight drywall is also fire-resistant.

Type X drywall

Type X drywall is the most fire-resistant type of drywall on the market. It features a fire-resistant gypsum core and two layers of paper. It is 5/8 inches thick and can be installed over two by four-inch steel or wood studs spaced at least 16 inches apart. Type X drywall also has a better sound-dampening capability and is generally used in commercial properties and apartment buildings.

When it comes to drywall, there are two common types: Type X and Type C. The Type X version is the thickest and does not sag as much. It is also the most fire-resistant type and is often used in buildings that need to have a higher fire-resistance rating.

Type X drywall is tougher and more expensive than other types. It has higher fire-resistance ratings than other types and is used on garage walls and other shared walls. It costs about 10% more than regular drywall.

Insulated drywall

There are two types of drywall: insulated and non-insulated. Insulated drywall is typically 1/2-inch thick and contains a polyfoam core to prevent warping. Non-insulated drywall is usually only 5/8-inch thick. Water-resistant drywall is also available. It’s ideal for areas prone to water damage.

Drywall panels come in four-foot-by-eight-foot sheets that can be installed horizontally or vertically. They are usually sold in pairs to facilitate easy installation. You can also purchase drywall in twelve and 16-foot-lengths. Choosing the right thickness for your ceiling will help you minimize the risk of damaging it during installation.

The best type of insulation to use on ceilings is made of fiberglass batts. It’s the best option for attics and ceilings because it has a facing that holds it in place and creates a vapor barrier. If you choose unfaced fiberglass batts, you’ll need to install a separate vapor barrier.

Green board drywall

A green board is a type of drywall that is made specifically for wet areas. Its green color helps reduce the risk of mold growth. However, this does not mean that it is completely mold-proof. Green board is not a replacement for standard drywall. It should be installed with caution.

However, it is not best for every area of your home. Some areas, such as bathrooms, are not suitable for green boards. While it may be a good option for some other rooms, you may want to avoid it in bedrooms. For one, the green board is heavier than standard drywall, so it may sag after a few years. Furthermore, green drywall is more likely to fall from the ceiling if there is a lot of moisture in the area.

One drawback of the green board is that it cannot be used in high moisture or direct moisture environments. While it might be cheaper per square foot, it is not the best choice for areas exposed to extreme heat or humidity. Consequently, you may want to use another type of drywall for these areas.